• Thoroughly and quickly cleans a broad assortment of fabrics without leaving any residue to attract re-soiling.
• Instantly controls odor without using an overpowering masking scent or chemicals that damage mammalian sense of smell, so important to enjoyment of good food.
• Instantly controls odor without using an overpowering masking scent or chemicals that damage mammalian sense of smell, so important in the enjoyment of food.
• Microbes digest trapped residual organics in carpet, underpad and even wood or concrete flooring, under the carpet.
• Synergistic bacteria produce the following enzymes, as needed: protease (both casease & gelatinase), esterase, lipase, amylase, cellulase, lignosulfonase, pentosanase and xylanase, assuring that most sources of soil and odor found in restaurants and homes will be easily digested.
• Improved degradation and deodorization of acetic, butyric, isobutyric, isovaleric, lactic, palmitic, propionic, stearic and valeric organic and fatty acids, source of odors from breakdown of fats, oils and grease from fatty foods.
• Effectively cleans carpets, upholstery, car seats, draperies, etc., without leaving a residue.
• All bacterial cultures are Biosafety Level 1 endospore-forming Bacillus.
• Safe and non-toxic formula.
  

Use contents of 5 gallon pail or 55 gallon-drum of concentrate when blending to produce single batch. Stir pail thoroughly (paint stirring drill attachment works well for this application if manufacturing area lacks overhead stirrers).. Dilute 1 part concentrate with four to nine parts of water to make finished product. Blend slowly for 15 to 30 minutes to assure proper spore dispersion in solution. If the product is to be sold bearing the Alken-Murray label, it should be diluted 1 part concentrate plus four parts of water.. Dilutions greater than 1 + 9 may decrease shelf-life.

Do not allow concentrate or blended formula to stand without agitation during repackaging or the amount of bacteria in each package may vary outside of specifications.

For use in a sprayer as a spot cleaner for upholstery, carpets or clothing:

1. Test fabric for colorfastness, using a section which does not show
2. Remove excess solids or liquids.
3. Dilute ALKEN CLEAR-FLO® 5202 1 + 4 parts water in sprayer or plant mister to make ready-to-use spot-cleaner product. A weaker 1 + 9 parts water may be used, instead, for less serious stain removal and higher economy for large applications. Fully diluted product will awaken quickly when presented with food, but will begin to die of starvation after 1 week in ready-to-use dilution.
4. Spray diluted product onto deeply soiled areas as a "pretreatment", especially for greasy stains and pet accidents.
5. You may pretreat clothing which has been soiled with food, urine, vomit, feces or greasy food stains prior to washing with your preferred detergent. Allow to soak wet for at least 15 minutes prior to laundering.
6. Place a clean, wet white towel over the seriously stained area for 24 hours prior to shampooing the entire carpet with ½ x or 1x ALKEN CLEAR-FLO® 5202 . In lower traffic areas with severe soiling, saran wrap can be used to slow evaporation, instead, if desired.
7. Since ALKEN CLEAR-FLO® 5202 leaves no residue, rinsing with clean, warm water, utilizing a sponge or soft towel, to pick up residues from the surface is optional. The bacterial enzymes will eventually digest the biodegradable surfactants in this product. The carpet will feel like new with no stiffness or stickiness.
   
   

For use in carpet cleaning extraction cleaning machines:

1. Test fabric for colorfastness, using a section which does not show.
2. Small home shampoo machines, such as Oreck and Regina use a specialized bottle to dispense pre-diluted product, so mix 3 oz. of ALKEN CLEAR-FLO® 5202 with 15 oz. of water, which will fill the typical bottle that fits these units. If 1/2X strength is used, the ratio changes to 6 oz. product with 7.5 oz. water.
3. For machines that add fresh water to the product added to a reservoir, add the product at standard (1x) strength, so that the machine will create the expected level of dilution designed to work with that unit. Be sure to follow the machine's dosage instructions.
4. ALKEN CLEAR-FLO® 5202 contains antifoam, but if this amount is insufficient for the particular shampoo extraction machine model, you may add 2 drops of ALKEN ANTIFOAM 880 or any other silicone antifoam, which will not impede bacterial performance.
5. Most shampoo extraction cleaning machines are designed with a rinse cycle, but this is optional, since ALKEN CLEAR-FLO® 5202 does not leave a residue, but rinsing gives one more opportunity to vacuum up all the indigestible, inorganic dirt that has been dissolved by ALKEN CLEAR-FLO® 5202 during the actual shampoo cycle.
   

Avoid using Lysol®, Chlorox® or other disinfectants for at least 1 hour after using this product.

ALKEN CLEAR-FLO® 5202-5XFF is packaged in 5 gallon plastic pails with pour-spout and handle or closed-head 55 gallon-drums. Store in a cool place. Avoid contact with eyes, skin, and open wounds. Wash hands with soap and water after handling. Avoid excessive inhalation. Store in a cool, dry place to prolong shelf-life.

Updat12-01-2006

Lysol®, Chlorox® and Kool-Aid® are trademarks that do not belong to Alken-Murray Corp. and are used here to illustrate the types of food that this product will digest, and are not intended to imply any sort of endorsement by the the companies that own these trademarks. Trademarks Alken and Alken CLEAR-FLO are trademarks of Alken-Murray Corporation.